Commands
Remote Base Commands
Code 71Activates the two meter remote base in receive mode
Code 72 Activates two meter remote base transmit mode
Code 71+Frequency+Shift (1=-600, 2=Simplex, 3=+600) (Example:71+70153)
Code 73 Deactivates the 2 meter remote base
Code 77+PL Code
Sets the remote base PL tone. The codes are listed below:
| 01 |
67.0 |
|
11 |
- |
|
21 |
136.5 |
|
31 |
192.8 |
| 02 |
71.9 |
|
12 |
100.0 |
|
22 |
141.3 |
|
32 |
203.5. |
| 03 |
74.4 |
|
13 |
103.5 |
|
23 |
146.2 |
|
33 |
210.7 |
| 04 |
77.0 |
|
14 |
107.2 |
|
24 |
151.4 |
|
34 |
218.1 |
| 05 |
79.7 |
|
15 |
110.9 |
|
25 |
156.7 |
|
35 |
225.7 |
| 06 |
82.5 |
|
16 |
114.8 |
|
26 |
162.2 |
|
36 |
233.6 |
| 07 |
85.4 |
|
17 |
118.8 |
|
27 |
167.9 |
|
37 |
241.8 |
| 08 |
88.5 |
|
18 |
123.0 |
|
28 |
173.8 |
|
38 |
250.3 |
| 09 |
91.5 |
|
19 |
127.3 |
|
29 |
179.9 |
|
|
|
| 10 |
94.8 |
|
20 |
131.8 |
|
30 |
186.2 |
|
|
|
IRLP (Internet Radio Linking Project )
is available on 147.015. There are no special commands to remember. Just enter the four digit node number to enable the node or 73 to disconnect the node
Node Maps
IRLP Reflector Status
Autopatch Commands
* + Telephone Number
- - Dials the telephone number
Dials the Autodial number
#- Hangs up the patch
Digital Voice Recorder (DVR) Commands
To test your audio
4*** then unkey. The next transmission will be repeated back to you.
Voice Response Telemetry Commands
All VRT commands start with 8.
815 Controller Internal Temperature
Adding a * or ** to the end of the command causes the stored low and high value to be read back, respectively.
Demo Messages
All Demo Messages start with 3.
30 Initial ID Message (randomly selected)
31
32 Anxious ID 1 Message
33 Pending ID 1 Message
34
35
36
37
38
39 Time of Day
3* 3 (Call Slot)
3**(1- 5)
Touchtone Pad Test
Touchtone Pad Buttons depressed after a number 5 will be read back in synthesized speech.
|